CNC Router Malaysia

- Left Pressure Feet Bottoms are used to replace broken, cracked, worn out ones. They are adhered to the pressure foot assembly with silicon.

- This is suitable for use with the original style pressure foot.

- Right Pressure Feet Bottoms are used to replace broken, cracked, worn out ones. They are adhered to the pressure foot assembly with silicon.

- This is suitable for use with the original style pressure foot.

- The Donut is fastened to the bottom of either the left or right pressure foot. It has a 2” or 50mm hole in the bottom and is ideal when cutting large sized parts, maximizing the efficiency of the vacuum.

- The Donut is fastened to the bottom of either the left or right pressure foot. It has a 1” or 25mm hole in the bottom and is ideal when cutting small sized parts, preventing them from being sucked up by the vacuum.

The 10 hp HSD Spindle is a high powered high speed spindle featuring automatic (or quick) change operation using IS030 tool holders.

Safety light curtains reliably and cost-effectively protect against access into hazardous points and areas.

This kit is designed for protection to cover one open side of your AXYZ CNC Router.

- The Unist Meter Rebuild Kit is a bundle of all the required wear parts needed to bring a Unist mister back to its full working potential.
- Mister system's performance will slowly deteriorate over time and use because the coolants and lubricants eventually foul the O rings and metering components.

- For cutting non-ferrous metals including aluminium, brass and copper, the Unist mister operates with more precision and reliability than other dispensing system available. The result is a continuous output of a micro fine lubricant mist providing better cut finish and longer tool bit life.

- This box cutter cartridge has been specifically designed for the Trident tangential knife unit.