CNC Router Malaysia, CNC Router Seremban

12VDC Solenoid - 3 Ports

- The 12VDC Solenoid - 3 Port valve is the most commonly installed solenoid valve on a machine.

They are used for ATC spindles, vacuum control zones, pop up pins, and other pneumatic devices.


More Details...

Proximity Sensor
This sensor directly connects to sensor cabling.
- For AXYZ CNC router only
Infinite - ACM Phenolic 3.5" Donut
Phenolic Pressure Foot Donut is top-down mounted for mounting on Infinite Cast Pressure Feet. For Integrated Wand System.

For AXYZ CNC router only
Subconsole/Smartconsole Cable Assembly 4-Pin

- This is a direct replacement cable that can be used on both the subconsole and 4-pin SmartConsole.

Console cables are damaged by excessive stretching by cutting or impact.


More Details...

Infinite - ACM Phenolic 3.5" Donut
- Phenolic Pressure Foot Donut is top-down mounted for mounting on Infinite Cast Pressure Feet.

- For Integrated Wand System.
- For AXYZ CNC Router only

Metric O-Ring
- For AXYZ CNC router only 
Pneumatic Plunger Cylinder 7G/21G ATC
- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.
Carriage Modbus REV.600
- The Carriage Modbus REV.600 is mounted inside the machine’s carriage. It connects the carriage sensors and controls for various devices available on A2MC machines.
60 AMP-800V Heavy Duty Bridge Rectifier
- The Heavy Duty Bridge Rectifier is recommended for systems with more than 4 stepper drives (multi head machines) as well as machines that have had problems with the bridge rectifiers failing.
Original Smouse/F25 Replacement Board
- The Original Smouse board will repair either an Smouse or an F25 Sensor.
Skimming Tooling
- Skimming tool for CNC router
The AXYZ Blue Glide Donut is a unique and highly durable accessory which has been developed especial

- The AXYZ Blue Glide Donut is a unique and highly durable accessory which has been developed especially for processing ACM.


More Details...

High Capacity Cast Pressure Foot

- This High Capacity Pressure foot will fit on both ELTE and HSD spindles on your AXYZ CNC Router.


More Details...

Ceramic and Glass Fuses

- Glass fuses are used to protect sensitive electronics where required.  The glass fuse holders will generally have a spare fuse in them.  Replace the spare fuse when it is used.


More Details...

Braking Resistor
- Braking resistors are used to absorb the power generated by decelerating spindles.
- Braking resistors allow an inverter to stop spindles much faster and safer.
A2MC Cooling Fan
- The A2MC Cooling Fan is a muffin style fan is installed into the A2MC controller enclosure.