CNC Router Malaysia

PANELBuilder CNC Router

PANELBuilder

One process, one solution

At a Glance:
  • Widths from 60' to 103'
  • Lengths from 48' to 50'
  • High-speed ACM processing
  • Multiple tool configurations
  • Dedicated CAD/CAM software
  • Primary Applications: Aluminum & Metal Composite Cladding

-We do supply CNC

More Details...

Trident CNC Router

TRIDENT

The most versatile router-knife combination in its class

At a Glance:
  • Widths from 60' to 85'
  • Lengths from 48' to 50'
  • Hybrid triple head configuration
  • Up to 10Hp router
  • Primary Applications: Graphics & Print Finishing, Signmaking, Foam Packaging, Point of

More Details...

Z Series CNC Router

Z SERIES

An ideal entry-level CNC router for first-time users and small shops, the AXYZ Z Series CNC router offers the same robust construction as AXYZ Series machines and at a lower cost.


More Details...

Pump Filter
- Pump filter for AXYZ CNC Router only. 
12VDC Solenoid - 3 Ports

- The 12VDC Solenoid - 3 Port valve is the most commonly installed solenoid valve on a machine.

They are used for ATC spindles, vacuum control zones, pop up pins, and other pneumatic devices.


More Details...

Proximity Sensor
This sensor directly connects to sensor cabling.
- For AXYZ CNC router only
Creasing Wheel B32 - Polypropyle 24mm
The Creasing Wheel is for polypropylene. The diameter of the wheel is 24 mm and has a thin cutting edge. This product comes with the axil included as shown in the images.

- For AXYZ CNC router only 
Knife Calibrator Retrofit Kit

The knife calibrator is a laser-based, non-contact sensor used for alignment correction and tool length detection of knife blades. The sensor is installed on the machine’s tabletop and is fitted with a sensor cover to protect the emitter and receiver from debris. The sensor operates in a similar fashion to the photoelectric beam seen in most garage door systems.


More Details...

Infinite - ACM Phenolic 3.5" Donut
Phenolic Pressure Foot Donut is top-down mounted for mounting on Infinite Cast Pressure Feet. For Integrated Wand System.

For AXYZ CNC router only
End Mill for Brass Material (Engraving)
- To engrave / craving on brass material
7-Pin Smartconsole with E-Stop
- For added safety, we have produced a SmartConsole with an E-Stop button mounted on the device, this allows the operator to stop the machine in case of an emergency. 
- For AXYZ CNC Router only
-Pin Smartconsole with E-Stop
For added safety, we have produced a SmartConsole with an E-Stop button mounted on the device, this allows the operator to stop the machine in case of an emergency. 

- For AXYZ CNC Router only
7-Pin Smartconsole
This component is the entire Smartconsole and will operate with any version of A2MC controller. Smartconsoles are very rugged and designed for industrial use but can be damaged by dropping or other very high impact events.

- For AXYZ CNC Router
4-Pin Smartconsole

This component is the entire Smartconsole and will operate with any version of A2MC controller. Smartconsoles are very rugged and designed for industrial use but can be damaged by dropping or other very high impact events.


More Details...

Subconsole/Smartconsole Cable Assembly 4-Pin

- This is a direct replacement cable that can be used on both the subconsole and 4-pin SmartConsole.

Console cables are damaged by excessive stretching by cutting or impact.


More Details...

Smartconsole Faceplate
- The Smartconsole Faceplate can easily be replaced if it is worn out or damaged. This is a membrane switch faceplate, so a new one is required if keys are sticking or broken.
- For ''AXYZ'' CNC Router only