CNC Router Malaysia, CNC Router Negeri Sembilan

Transmission 60/24 Barrel 2.54" X
- Barrel Assemblies are used in the X and Y transmissions. Length: 2.54'' Axis: X Large Pinion: 60 Teeth Small Pinion: 24 Teeth
- For AXYZ CNC router
Universal Lexan Pressure Foot Seal
- The Universal Lexan Seal is used to optimize vacuum performance on systems that are not using nose riders or bellows.
KNI-VINYL-MECH: Mechanical Vinyl Knife

- The Mechanical Vinyl Knife is a precision drag knife that is generally used for pre-applied vinyl cutting.


More Details...

Saber Blade
- Saber Blade for CNC Router 
4.8" Universal Pressure Foot Brush Donut
-The Brush Donut can be fitted on the bottom of the high capacity pressure foot. The brush helps prevent scratching when machining very sensitive materials.
Vexta PK299F4.5 Stepper with Pulley

- The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).


More Details...

Pneumatic Male Run Tee 1/8" PT x 4 mm x 4 mm
- Pneumatic Male Run Tee 1/8'' PT x 4 mm x 4 mm for AXYZ CNC Router
3-Pin Stepper Drive Plug
- Replacement 3-pin stepper drive plug for AXYZ CNC routers.
Pulleys
- Pulleys are a vital part to support the cnc router machine. There primary use is to support the movement of the Z plate.
Molex Proximity Sensor A
- This sensor is fitted with a 3 pin Molex connector on approximately 2 m (6 ft) of cable.
Molex Proximity Sensor B
- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.
Leveling Foot 3/4" Stud
- For AXYZ CNC Router