CNC Router Malaysia Selangor, Malaysia, Penang, Johor Bahru (JB), Kuala Lumpur (KL), Puchong, Juru, Nusajaya

Compare

- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.

Compare

- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.

Compare

THK H-Type Grease Nozzle for MG70

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to THK Linear Bearings.

Compare

Needle Tip Grease Gun Adaptor

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.

Compare

Fan/Filter for Eurobox

- This is a replacement fan for Eurobox style control boxes. It includes the fan, bezel, and filter enclosure.

Compare

7G/21G Long Steel Body Cup

- Extended length (11.625') tool cups for 7G or 21G ATC system.

Compare

Pneumatic Plunger Cylinder 7G/21G ATC

- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.

Compare

USB to RS485 Converter Box

- The USB to RS485 converter box is used to communicate between a PC running Toolpath and an AMC machine controller. This device plugs into a USB port on the PC and converts the communication signal to RS485 which can be then connected to the AMC controller.

More Details...

Compare

Assembled Rev. 05A Connection Board

- The AMC connection board provides power to the machine’s drives, makes the connections to the drives and sensors, as well as providing power to the AMC itself.

Compare

AMC004G/H Flash Board

- The AMC Flash Board fits on either AMC004G or AMC004H AMC controllers. This device holds both the operating system and the jobs on 4 Mbytes of memory.

More Details...

Compare

Carriage Modbus REV.600

- The Carriage Modbus REV.600 is mounted inside the machine’s carriage. It connects the carriage sensors and controls for various devices available on A2MC machines.

Compare

Zoning Modbus REV.600

- The Zoning Modbus controller operates on the A2MC Modbus network and has several uses.
- It is used to operate either dual or triple vacuum manifolds.
- It is also used to operate vacuum hold down zones and pop up pins.

Compare

Motor Overload Protectors

- Motor Overload Protectors are not used on the control panels but are installed on all contactors controlling pumps, drills, and other peripheral device motors.
- These devices ensure that a motor does not overheat and start a fire; so it is vital the correct device is used and it is set properly.

More Details...

CNC Router Malaysia

Selected tag