CNC Router Perak
Selected tag
Tag Selection
- CNC Router Perak (87)
- CNC Router Malaysia (134)
- CNC Router Selangor (125)
- CNC Router Penang (113)
- CNC Router Johor (76)
- CNC Router Melaka (42)
- CNC Router Seremban (32)
- CNC Router for Wood Working Malaysia (15)
- CNC Router Negeri Sembilan (13)
- CNC Router for Wood Working Selangor (10)
- CNC Router Singapore (8)
- CNC Router for Wood Working Johor (5)
- CNC Router Pulau Pinang (5)
- CNC Router for Aluminium Penang (4)
- CNC Router for Aluminum Malaysia (4)
- CNC Router for Aluminum Selangor (3)
- CNC Router Sabah (3)
- CNC Router Sarawak (3)
- CNC Engraving Machine Penang (2)
- CNC Router for Wood Kedah (1)
- CNC Router Kedah (1)
- Wood Working CNC Router Johor (1)
- The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).
More Details...
- Pneumatic Male Run Tee 1/8'' PT x 4 mm x 4 mm for AXYZ CNC Router
- The A2MC Power Board supplies and distributes power to the machine’s motor drives. It is a UL certified device that can power up to 8 motor drives. The nominal operating voltage is 65 VDC.
More Details...
- Pulleys are a vital part to support the cnc router machine. There primary use is to support the movement of the Z plate.
- Unlike Star or THK bearings Thompson bearings are standardized regardless of manufacturer. Simply ensure the correct diameter of rail is selected.
- Grease Nipples are added onto bearings to allow for proper greasing. Well greased bearings run better and smoother.
It is vital that you maintain your machine by regular greasing of the bearings and ball screws.
More Details...
- This sensor is fitted with a 3 pin Molex connector on approximately 2 m (6 ft) of cable.
- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.
- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.
- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.
- This is a replacement fan for Eurobox style control boxes. It includes the fan, bezel, and filter enclosure.
- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.
