CNC Router Perak

Pressure mat safety systems are installed onto the floor around your AXYZ CNC Router. These are used to guard the operator/persons by stopping anyone entering the cutting zone. The pressure mat operates when pressure is applied to the mat surface. This result is the machine will stop (pause) until the zone is clear and the job will need to be re-started by the operator.

More Details...

- Oil dripper to be used in conjunction with the oscillating knife option to ensure proper maintenance procedures are followed.

- The Unist Plastic Nozzle Tip is a replacement spray tips for misting systems. Old and broken spray tips can be easily removed from misting wands and replaced using this part.

The Universal 5Y pressure foot plays just as vital a role as the high capacity pressure foot. It has been specifically engineered to accept 2'' or 4'' diameter hoses and allows for manual adjustment of the ride height for faster material and tool setup often demanded in today's busy workplace.

More Details...

- For AXYZ CNC Router only

- The universal adjustable nose riding system is designed to fit with high capacity pressure and is used to very precisely set the cutting depth of a tool. It is commonly used for v-grooving ACM materials but can be used where ever high precision depths are required.

- The ELTE PF Reducer Bushing is used specifically for 5 hp ELTE spindles. It enables the use of the bellows or nose rider options for the smaller spindles.

- This is a replacement blast gate for high capacity pressure feet.

- The Blast Gate allows you to adjust the amount of air going into the pressure foot depending on the application.

More Details...

- The newly constructed Universal Pressure Foot Donut is now blind (top-down) mounted. Our new blind mount donut replaces the old bottom-up design and fits all AXYZ High Capacity and 5Y pressure feet.

More Details...

- The bellows system provides an extremely efficient vacuum performance. The bellows completely enclose the tooling, virtually elimination all vacuum leakage.

The Pneumatic Air Cylinder 1'' Stroke is a replacement for the ones on the pressure feet (PFL-E-S-Z and PFR-E-S-Z). These must be replaced if the pressure foot has suffered a collision and the pistons are bent.

More Details...

- For AXYZ CNC Router Machine

These are replaceable brush rings which clip into place on the swarf cones used on various manual and quick release (ATC) spindles on the original Pacer CNC Routers only. Used correctly, they will eliminate the scattering of swarf and dust by the cutter and they enhance the performance of the cyclonic extraction system to maintain a clean and tidy workplace

HK bearings are the most commonly used bearings on CNC routers.  Star and THK bearings look quite similar so carefully check the drawings below to ensure you have selected the correct bearings.  Also check the axis and match the bearings using the pictures.

More Details...

- The Holding Break is used to hold either a stepper or servo Z axis in place when the power is turned off.

- Inverters (also called Variable Frequency Drives or VFD) are generally used to power high speed spindles. However they are sometimes used to power other motors, especially pumps and blowers in single phase applications.

- Saber Blade for CNC Router 

-The Brush Donut can be fitted on the bottom of the high capacity pressure foot. The brush helps prevent scratching when machining very sensitive materials.