CNC Router Malaysia Selangor, Malaysia, Penang, Johor Bahru (JB), Kuala Lumpur (KL), Puchong, Juru, Nusajaya

Compare

- Extended length (11.625') tool cups for 7G or 21G ATC system.

Compare

- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.

Compare

USB to RS485 Converter Box

- The USB to RS485 converter box is used to communicate between a PC running Toolpath and an AMC machine controller. This device plugs into a USB port on the PC and converts the communication signal to RS485 which can be then connected to the AMC controller.

More Details...

Compare

Assembled Rev. 05A Connection Board

- The AMC connection board provides power to the machine’s drives, makes the connections to the drives and sensors, as well as providing power to the AMC itself.

Compare

AMC004G/H Flash Board

- The AMC Flash Board fits on either AMC004G or AMC004H AMC controllers. This device holds both the operating system and the jobs on 4 Mbytes of memory.

More Details...

Compare

Carriage Modbus REV.600

- The Carriage Modbus REV.600 is mounted inside the machine’s carriage. It connects the carriage sensors and controls for various devices available on A2MC machines.

Compare

Zoning Modbus REV.600

- The Zoning Modbus controller operates on the A2MC Modbus network and has several uses.
- It is used to operate either dual or triple vacuum manifolds.
- It is also used to operate vacuum hold down zones and pop up pins.

Compare

Motor Overload Protectors

- Motor Overload Protectors are not used on the control panels but are installed on all contactors controlling pumps, drills, and other peripheral device motors.
- These devices ensure that a motor does not overheat and start a fire; so it is vital the correct device is used and it is set properly.

More Details...

Compare

60 AMP-800V Heavy Duty Bridge Rectifier

- The Heavy Duty Bridge Rectifier is recommended for systems with more than 4 stepper drives (multi head machines) as well as machines that have had problems with the bridge rectifiers failing.

Compare

GPBC 3510/FBR 5010 Bridge Rectifier

- The bridge rectifier supplies the power to an AMC machine’s stepper drives.
- This version plugs into the connection board. If this part has failed there is no power to the stepper drives.
- A more powerful bridge rectifier is available if you have a multi head machine or you are having problems with this part failing frequently.

Compare

Phenolic Pressure Foot Donut

- The newly constructed Phenolic Pressure Foot Donut is now blind (top-down) mounted.
- Our new blind mount donut replaces the old bottom-up design and fits all AXYZ High Capacity Pressure Feet.

More Details...