CNC Router Malaysia, CNC Router Penang
Selected tag
Tag Selection
- CNC Router Malaysia (134)
- CNC Router Penang (113)
- CNC Router Selangor (124)
- CNC Router Perak (86)
- CNC Router Melaka (42)
- CNC Router Seremban (32)
- Wood Working CNC Router Johor (1)
- CNC Router Johor (75)
- Wood Working CNC Router Malaysia (1)
- CNC Router Kedah (1)
- Engraving Machine Malaysia (1)
- CNC Router Sabah (3)
- CNC Router Negeri Sembilan (12)
- CNC Router for Wood Working Selangor (10)
- CNC Router Seremban Negeri Sembilan (2)
- CNC Router for Wood Working Malaysia (15)
- CNC Router for Wood Working Johor (5)
- CNC Router For Woodworking Selangor (3)
- CNC Engraving Machine Selangor (2)
- CNC Carving Machine Selangor (2)
- CNC Router Sarawak (3)
- Pulleys are a vital part to support the cnc router machine. There primary use is to support the movement of the Z plate.
- Unlike Star or THK bearings Thompson bearings are standardized regardless of manufacturer. Simply ensure the correct diameter of rail is selected.
- Grease Nipples are added onto bearings to allow for proper greasing. Well greased bearings run better and smoother.
It is vital that you maintain your machine by regular greasing of the bearings and ball screws.
More Details...
- This sensor is fitted with a 3 pin Molex connector on approximately 2 m (6 ft) of cable.
- This sensor is fitted with a 3 pin Panduit header on approximately 2 m (6 ft) of cable.
- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.
- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.
- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to THK Linear Bearings.
- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.
- This is a replacement fan for Eurobox style control boxes. It includes the fan, bezel, and filter enclosure.