CNC Router Selangor, CNC Router Perak

12VDC Solenoid - 5 Port
- The 12VDC Solenoid - 5 Port valves are generally used for tool changers.
Pulleys
- Pulleys are a vital part to support the cnc router machine. There primary use is to support the movement of the Z plate.
INA Round Rail Bearing
- Unlike Star or THK bearings Thompson bearings are standardized regardless of manufacturer.  Simply ensure the correct diameter of rail is selected.  
Grease Nipples

- Grease Nipples are added onto bearings to allow for proper greasing. Well greased bearings run better and smoother.
It is vital that you maintain your machine by regular greasing of the bearings and ball screws.


More Details...

Pneu 90 degree Male Elbow 1/8 inch - 4mm tube
- Pneu 90 degree Male Elbow 1/8 inch - 4mm Tube
Molex Proximity Sensor A
- This sensor is fitted with a 3 pin Molex connector on approximately 2 m (6 ft) of cable.
Proximity Sensor
- This sensor directly connects to sensor cabling.
Molex Proximity Sensor B
- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.
2 Port Manual 3 Way Pneumatic Valve
- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.
Needle Tip Grease Gun Adaptor
- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.
Fan/Filter for Eurobox
- This is a replacement fan for Eurobox style control boxes. It includes the fan, bezel, and filter enclosure.
7G 4.5mm Lexan Door
- Replacement Lexan door for a 7G ATC.
7G/21G Long Steel Body Cup
- Extended length (11.625') tool cups for 7G or 21G ATC system.
Pneumatic Plunger Cylinder 7G/21G ATC
- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.
USB to RS485 Converter Box

- The USB to RS485 converter box is used to communicate between a PC running Toolpath and an AMC machine controller.  This device plugs into a USB port on the PC and converts the communication signal to RS485 which can be then connected to the AMC controller.


More Details...

Assembled Rev. 05A Connection Board
- The AMC connection board provides power to the machine’s drives, makes the connections to the drives and sensors, as well as providing power to the AMC itself.

 

AMC004G/H Flash Board

- The AMC Flash Board fits on either AMC004G or AMC004H AMC controllers. This device holds both the operating system and the jobs on 4 Mbytes of memory.


More Details...

Carriage Modbus REV.600
- The Carriage Modbus REV.600 is mounted inside the machine’s carriage. It connects the carriage sensors and controls for various devices available on A2MC machines.