CNC Router Selangor Selangor, Malaysia, Penang, Johor Bahru (JB), Kuala Lumpur (KL), Puchong, Juru, Nusajaya

Compare

- The 12VDC Solenoid - 5 Port valves are generally used for tool changers.

Compare

- Grease Nipples are added onto bearings to allow for proper greasing. Well greased bearings run better and smoother.
It is vital that you maintain your machine by regular greasing of the bearings and ball screws.

More Details...

Compare

Pneu 90 degree Male Elbow 1/8 inch - 4mm tube

- Pneu 90 degree Male Elbow 1/8 inch - 4mm Tube

Compare

Panduit Proximity Sensor

- This sensor is fitted with a 3 pin Panduit header on approximately 2 m (6 ft) of cable.

Compare

2 Port Manual 3 Way Pneumatic Valve

- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.

Compare

THK H-Type Grease Nozzle for MG70

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to THK Linear Bearings.

Compare

Needle Tip Grease Gun Adaptor

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.

Compare

Fan/Filter for Eurobox

- This is a replacement fan for Eurobox style control boxes. It includes the fan, bezel, and filter enclosure.

Compare

7G/21G Long Steel Body Cup

- Extended length (11.625') tool cups for 7G or 21G ATC system.

Compare

Zoning Modbus REV.600

- The Zoning Modbus controller operates on the A2MC Modbus network and has several uses.
- It is used to operate either dual or triple vacuum manifolds.
- It is also used to operate vacuum hold down zones and pop up pins.

Compare

A2MC Formatted Compact Flash

- Compact Flash formatted with Windows CE 6.0 and default A2MC operating system.
- This part is used to replace corrupted A2MC memory.
- Origin: UK

Compare

Pressure Foot Donut with 2" Hole

- The Donut is fastened to the bottom of either the left or right pressure foot. It has a 2” or 50mm hole in the bottom and is ideal when cutting large sized parts, maximizing the efficiency of the vacuum.

More Details...

Compare

Single Zone Vacuum T-Slot End Plug

- This plug is used to repair leaking vacuum deck extrusion.
- Origin: UK

Compare

24" Unist Plastic Nozzle Assembly

- This Plastic Nozzle Assembly is a 24 inch (610 mm) replacement Unist misting system wand.

Compare

18" Unist Plastic Nozzle Assembly

- This Plastic Nozzle Assembly is a replacement 18 inch (450 mm) wand for Unist misting system.
- Wands can be easily damaged. Consider maintaining at least one spare part to ensure that you do not lose production time.
- Origin: UK

Compare

Unist Mister System

- For cutting non-ferrous metals including aluminium, brass and copper, the Unist mister operates with more precision and reliability than other dispensing system available. The result is a continuous output of a micro fine lubricant mist providing better cut finish and longer tool bit life.

More Details...

CNC Router Selangor, CNC Router Melaka

Selected tag