CNC Router Selangor, CNC Router Penang

The Pneumatic Air Cylinder 1'' Stroke is a replacement for the ones on the pressure feet (PFL-E-S-Z and PFR-E-S-Z). These must be replaced if the pressure foot has suffered a collision and the pistons are bent.

More Details...

- For AXYZ CNC Router Machine

- This powerful pneumatically powered 9000 strokes per minute oscillating knife is compact and fast. It can knife cut very tough and thick materials.

More Details...

- This Saber Blade Cartridge has been specifically designed for the Trident Tangential knife unit.
- Saber Blades are especially useful for cutting very tough materials such as vinyl flooring and gasketing.

- Pizza wheel holder for AXYZ CNC Router

- The Creasing Wheel Post is the holder specifically designed for the Trident Series CNC Router (AXYZ). 
- Creasing wheels and axils are sold separately.

- The Mechanical Vinyl Knife is a precision drag knife that is generally used for pre-applied vinyl cutting.

More Details...

These are replaceable brush rings which clip into place on the swarf cones used on various manual and quick release (ATC) spindles on the original Pacer CNC Routers only. Used correctly, they will eliminate the scattering of swarf and dust by the cutter and they enhance the performance of the cyclonic extraction system to maintain a clean and tidy workplace

HK bearings are the most commonly used bearings on CNC routers.  Star and THK bearings look quite similar so carefully check the drawings below to ensure you have selected the correct bearings.  Also check the axis and match the bearings using the pictures.

More Details...

- The Holding Break is used to hold either a stepper or servo Z axis in place when the power is turned off.

- Inverters (also called Variable Frequency Drives or VFD) are generally used to power high speed spindles. However they are sometimes used to power other motors, especially pumps and blowers in single phase applications.

- Saber Blade for CNC Router 

-The Brush Donut can be fitted on the bottom of the high capacity pressure foot. The brush helps prevent scratching when machining very sensitive materials.

- The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).

More Details...

- The A2MC Power Board supplies and distributes power to the machine’s motor drives. It is a UL certified device that can power up to 8 motor drives. The nominal operating voltage is 65 VDC.

More Details...

- Replacement 5-pin stepper drive plug for AXYZ CNC routers.

- RS485 Modbus module for AXYZ CNC Router

- Replacement 3-pin stepper drive plug for AXYZ CNC routers.