CNC Router Selangor
Selected tag
Tag Selection
- CNC Router Selangor (124)
- CNC Router Johor (75)
- CNC Router Penang (113)
- CNC Routing Machine Johor (1)
- CNC Router for Woodworking Kedah (1)
- CNC Router Malaysia (134)
- CNC Router for Wood Working Malaysia (15)
- CNC Knife Cutting Machine Singapore (2)
- CNC Router Singapore (8)
- CNC Knife Cutting Machine Selangor (1)
- CNC Router for Wood Working Johor (5)
- CNC Router for Wood Working Selangor (10)
- CNC Router Perak (86)
- CNC Router Melaka (42)
- CNC Router Seremban (32)
- CNC Router Pahang (1)
- Wood Working CNC Router Johor (1)
- Wood Working CNC Router Malaysia (1)
- CNC Router Kedah (1)
- Engraving Machine Malaysia (1)
- CNC Router Sabah (3)
- CNC Router Negeri Sembilan (12)
- CNC Router Seremban Negeri Sembilan (2)
- CNC Engraving Machine Selangor (2)
- CNC Carving Machine Selangor (2)
- CNC Router Sarawak (3)
- CNC Router for Aluminum Malaysia (4)
- CNC Router for Aluminium Penang (4)
- CNC Router for Wood Kedah (1)
- CNC Router for Foam Cutting Malaysia (1)
- CNC Router Pulau Pinang (4)
-The Brush Donut can be fitted on the bottom of the high capacity pressure foot. The brush helps prevent scratching when machining very sensitive materials.
- The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).
More Details...
- Pneumatic Male Run Tee 1/8'' PT x 4 mm x 4 mm for AXYZ CNC Router
- The A2MC Power Board supplies and distributes power to the machine’s motor drives. It is a UL certified device that can power up to 8 motor drives. The nominal operating voltage is 65 VDC.
More Details...
- Pulleys are a vital part to support the cnc router machine. There primary use is to support the movement of the Z plate.
- Unlike Star or THK bearings Thompson bearings are standardized regardless of manufacturer. Simply ensure the correct diameter of rail is selected.
- Grease Nipples are added onto bearings to allow for proper greasing. Well greased bearings run better and smoother.
It is vital that you maintain your machine by regular greasing of the bearings and ball screws.
More Details...
- This sensor is fitted with a 3 pin Molex connector on approximately 2 m (6 ft) of cable.
- This sensor is fitted with a 3 pin Panduit header on approximately 2 m (6 ft) of cable.
- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.
- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.