CNC Router Selangor

- The universal adjustable nose riding system is designed to fit with high capacity pressure and is used to very precisely set the cutting depth of a tool. It is commonly used for v-grooving ACM materials but can be used where ever high precision depths are required.

- The ELTE PF Reducer Bushing is used specifically for 5 hp ELTE spindles. It enables the use of the bellows or nose rider options for the smaller spindles.

- This is a replacement blast gate for high capacity pressure feet.

- The Blast Gate allows you to adjust the amount of air going into the pressure foot depending on the application.

More Details...

- The newly constructed Universal Pressure Foot Donut is now blind (top-down) mounted. Our new blind mount donut replaces the old bottom-up design and fits all AXYZ High Capacity and 5Y pressure feet.

More Details...

- Assembled Pressure Foot Bellow. The bellow system completely encloses tooling which reduces vacuum leakage resulting in increased chip collection.

- The bellows system provides an extremely efficient vacuum performance. The bellows completely enclose the tooling, virtually elimination all vacuum leakage.

The Pneumatic Air Cylinder 1'' Stroke is a replacement for the ones on the pressure feet (PFL-E-S-Z and PFR-E-S-Z). These must be replaced if the pressure foot has suffered a collision and the pistons are bent.

More Details...

- For AXYZ CNC Router Machine

- This powerful pneumatically powered 9000 strokes per minute oscillating knife is compact and fast. It can knife cut very tough and thick materials.

More Details...

- This Saber Blade Cartridge has been specifically designed for the Trident Tangential knife unit.
- Saber Blades are especially useful for cutting very tough materials such as vinyl flooring and gasketing.

- Pizza wheel holder for AXYZ CNC Router

- The Creasing Wheel Post is the holder specifically designed for the Trident Series CNC Router (AXYZ). 
- Creasing wheels and axils are sold separately.

- The Mechanical Vinyl Knife is a precision drag knife that is generally used for pre-applied vinyl cutting.

More Details...

These are replaceable brush rings which clip into place on the swarf cones used on various manual and quick release (ATC) spindles on the original Pacer CNC Routers only. Used correctly, they will eliminate the scattering of swarf and dust by the cutter and they enhance the performance of the cyclonic extraction system to maintain a clean and tidy workplace

HK bearings are the most commonly used bearings on CNC routers.  Star and THK bearings look quite similar so carefully check the drawings below to ensure you have selected the correct bearings.  Also check the axis and match the bearings using the pictures.

More Details...

- The Holding Break is used to hold either a stepper or servo Z axis in place when the power is turned off.

- Inverters (also called Variable Frequency Drives or VFD) are generally used to power high speed spindles. However they are sometimes used to power other motors, especially pumps and blowers in single phase applications.

- Saber Blade for CNC Router